Maxsurf Webinars and Videos

Short ‘features’ videos and longer ‘how to’ webinars on many Maxsurf aspects

Please click here to contact us for more details.

Each Video is 3-5 minutes – There are almost 100 carefully targetted videos and a selection of these are displayed further down this page
Each Webinar is 30-40 minutes

There are also many shorter videos demonstrating individual features of the Maxsurf Naval Architecture suite of applications
https://lnkd.in/ge3VnBe

The following is a selection of these Maxsurf videos

MAXSURF 22.03 – Tips and Tricks in Modeler – Surface Table

New Trimesh Modeling Enhancements. This video highlights some of the new features which have been added to MOSES Hull Modeler 11.03 and Maxsurf 22.release 3. These features facilitate the modeling of offshore floating foundation structures using simple trimesh primitive shapes. The interactive UI is demonstrated as well as an example of how automatic parametric modeling of these types of structures can be scripted via the Hull Modeler COM automation interface

Maxsurf 22.03 – Model Transfer from Modeler to Multiframe

Maxsurf Stability – Modeling Rooms

Before you can carry out some of the more advanced analysis in Stability, you need to have some tanks and compartments defined. This video gives a brief overview of how to define those compartments.

Maxsurf Stability – Modeling Complex Rooms. This video gives an overview of how to define complex tanks and compartments in Stability.

Combining both NURBS and Trimesh surfaces in a Maxsurf design file

This tutorial will show you how you can use both NURBS and Trimesh surfaces in the same Maxsurf design file. It will also show how, combined with the ability to select specific surfaces for analysis, a single model file can be used by all the Maxsurf modules.

Maxsurf Modeler – Dynamic Surface Trimming. This is the fourth video in the series discussing modeling techniques in Maxsurf . Here is an overview of dynamic trimming model in Maxsurf , which means you can dynamically trim one surface to another when they intersect.

Maxsurf Stability – Large Angle Stability

The following 2025 videos are without audio so rely on the captions to explain:

Maxsurf Modeler – How to Modify a Basis Model

Need to adapt an existing hull to meet new design requirements? This tutorial will show you how to quickly and accurately modify a basis hull form to your desired dimensions and hydrostatic properties using Maxsurf Modeler. Learn how to leverage powerful scaling methods to accelerate your naval architecture workflow. We’ll guide you through using background images and 3D DXF construction lines for precision, and demonstrate how to transform your model to meet specific design constraints. In this video, you will learn how to: • Scale your hull to meet a specified displacement, waterline length, beam, or immersed depth. • Perform linear scaling on entire surfaces or fine-tune specific areas using control points. • Use non-linear scaling (Parametric Transformation) to adjust for Block Coefficient, Prismatic Coefficient, and LCB. • Compare your modified hull against the original to visualize changes and validate your design.

Maxsurf Modeler – Creating your first NURB surface model of a ship

In Maxsurf Modeler, learn how to create a simple model of a ship and appendages using bonded and trimmed NURB surfaces.

Introduction to Maxsurf Motions. How to estimate ship performance in calm water and waves..

Introduction to Maxsurf stability. How to create rooms, load and damage cases and perform static stability analyses..

How to model internal “Structure” surfaces in Modeler for defining complex room geometry in Stability.

In Maxsurf, learn how to model primary structural Parts in Modeler (Frames, Decks, Plates and Stringers).

Short ‘features’ videos and longer ‘how to’ webinars on many Maxsurf aspects

Please click here to contact us for more details.